如何用寄存器将端口引脚连接到全局输出线 [How to register the port pin is ...

Discussion of the PSoC Designer integrated development environment for PSoC1 devices.

Moderators: ericb, dcooper, jonp, dpfunston

如何用寄存器将端口引脚连接到全局输出线 [How to register the port pin is ...

Postby hyq » Wed Mar 05, 2014 12:29 am

我想动态地连接引脚和全局输出线,这需要在程序中用寄存器来实现,但是,我在技术参考手册中没有找到这个寄存器,请问这是哪个寄存器呢?

[moderator] Google Translate:
How to register the port pin is connected to the global output line

I want to dynamically connect pin and global output lines, which require the procedures used to implement the register, but I did not find this register in the technical reference manual, is that which register it?
hyq
Newbie
Newbie
 
Posts: 1
Joined: Tue Feb 25, 2014 6:49 pm

Re: 如何用寄存器将端口引脚连接到全局输出线 [How to register the port pin is ...

Postby danadak » Wed Mar 05, 2014 6:30 pm

AN2094, page 14 - http://www.cypress.com/?rID=2900

Regards, Dana
Field Application Engineer
KB1RHB Mostly listen :)
Semi Retired
User avatar
danadak
The Big Cheese
The Big Cheese
 
Posts: 2008
Joined: Thu Dec 27, 2007 8:42 am
Location: New Hampshire


Return to “%s” PSoC Designer (PSoC1 IDE)

Who is online

Users browsing this forum: No registered users and 1 guest