Psco1 blood presure monitoring system

Discussion of the PSoC CY8C24x94 and other PSoC like USB parts from Cypress should be discussed here. This forum is limited to the discussion of USB portion of those parts. Other forums should still be used to discuss the non USB features of these parts.

Moderator: ericb

Psco1 blood presure monitoring system

Postby alekarasma » Mon Oct 28, 2013 5:23 am

Hello everyone ,

I have purchased Psoc1 development kit . i have got one application note of Psco1 blood presure monitoring system which i am trying to implement. i am not understanding this part of a macro actually in code .

#DEFINE INSAMP_OUT_TO_ADC ASC21CR1 & =0x80 ; ASC21CR1 |=0x9F

it is anding the register ASC21CR1 with a value 0x80 but after that what does the semicolon do.

what does the semicolon do.

and the other thing in TRM this register ASC21CR1 has got two inputs A inputs & C inputs for different bits

which input is selected and what is the significance of this two inputs.

i have attached the image of this register.please help me...



thanks & regards

asma
alekarasma
Newbie
Newbie
 
Posts: 2
Joined: Mon Oct 28, 2013 3:35 am

Re: Psco1 blood presure monitoring system

Postby bobmarlowe » Mon Oct 28, 2013 7:58 am

This question was answered in Cypress forum here .
Please avoid multiple posts, the same contributors are watching all the forums.

Bob
User avatar
bobmarlowe
The Big Cheese
The Big Cheese
 
Posts: 1490
Joined: Thu Oct 06, 2011 2:03 am
Location: Germany


Return to “%s” USB

Who is online

Users browsing this forum: No registered users and 1 guest

cron