PSoC - USBFS and Driver

Discussion of the PSoC CY8C24x94 and other PSoC like USB parts from Cypress should be discussed here. This forum is limited to the discussion of USB portion of those parts. Other forums should still be used to discuss the non USB features of these parts.

Moderator: ericb

PSoC - USBFS and Driver

Postby NDEL » Tue Mar 06, 2012 9:35 am

Hello, I am currently working through Application Note 56377, and I am having some difficulty in setting up the USB drivers for the vendor and product ID's; I am working on Windows 7 x86 with PSoC 5 and CY8CKIT-001.

The error that I am continually running into is changing the product and vendor ID in the .inf file. I am following the tutorial on how to do that, but when I plug in the device, the PSoC is not detected, although my computer does detect that something is plugged into the USB port. When changing the product and vendor ID's, I am using the ones that are setup in the PSoC USBFS, provided in the Application note; is that correct? I am also following the Cypress CyUSB.sys Manual for changing and setting up the drivers. I have the latest version of the Cypress USB Suite.

I have attached the .inf as a text document if anyone is able to look over it and see if there are any errors.

Thank you for your help!
(2.75 KiB) Downloaded 175 times
Posts: 1
Joined: Tue Mar 06, 2012 9:22 am

Return to “%s” USB

Who is online

Users browsing this forum: No registered users and 1 guest