Oddy behaviour of bootloaded application

A catchall for PSoC3 discussions not captured by the other forums.

Moderator: ericb

Oddy behaviour of bootloaded application

Postby laurentio86 » Tue Nov 12, 2013 2:28 am

I am developing a firmware for a custom board based on PSoC 3.
I am currently using PSoC Creator 3.0 updated at last version with all the components updated to their last version.
I decided to try to implement bootloader capability to my board to be able to distribute new firmware updates to customers without the need to have a MiniProg.

Following the Application Note AN68272 I was able to upload new firmware into my board through UART and I was happy to see that everything seemed to work fine. When I tried to perform a complete check about all the functionality of my firmware, I discovered that some of the pins were not properly driven.
In my specific case I use a PWM block to drive 2 DC motors with 2 H-Bridge. When I use the same application updated directly through MiniProg programmer, the two motors work fine, but when I update the firmware using bootloader capability, one of the two motors does not move at all.

the bootloader block has the "Bootloader application validation" checkbox checked and the "Fast bootloadable application validation" checkbox unchecked. I use the bootloader host program included in PSoC Creator 3.0 to upload my application, and I also tried to verify the uploaded application (with the bootloader host application) and everything seems to be ok.

Does anybody experienced similar problems? Is there someone who can give me some advicecs or other attempt to do?
Thank you very much.
Posts: 1
Joined: Tue Nov 12, 2013 2:16 am

Re: Oddy behaviour of bootloaded application

Postby bobmarlowe » Tue Nov 12, 2013 8:26 am

Avoid double posts in the forums. Usually the interested contributors monitor both forums and answer at both (although I really appreciate this one here, because the software is classes better than Cypress's :evil: ) . Have a look at answers here.

User avatar
The Big Cheese
The Big Cheese
Posts: 1490
Joined: Thu Oct 06, 2011 2:03 am
Location: Germany

Return to “%s” PSoC3 General

Who is online

Users browsing this forum: No registered users and 1 guest