FreeRTOS 7.3.0 starting project for PSOC5

A catchall for PSoC5 discussions not captured by the other forums.

Moderator: ericb

FreeRTOS 7.3.0 starting project for PSOC5

Postby dBFS » Sat Jan 12, 2013 11:59 am

I recently found myself in need of a simple starting point for setting up FreeRTOS with a PSoC5. However, when I looked at the PSoC5 demo included with the FreeRTOS source code, I found that it was targeted at the more expensive CY8CKIT-001, and that the demo code included lots of features I didn't want and would have to remove. A little searching in the FreeRTOS forums yielded a post (http://www.freertos.org/Interactive_Frames/Open_Frames.html?http://interactive.freertos.org/verification/email/mrfdqqzyysdrytv/) in which a user had graciously contributed a far simpler demo consisting of two tasks that flash LED's.

I have updated this simple project for use in PSOC Creator 2.2, and re-targeted it at the CY8CKIT-014 (PSoC First Touch) and CY8CKIT-050 development kits. Build instructions and notes can be found in the readme.txt file bundled with the project. Hopefully, others will find this a useful starting point for their FreeRTOS explorations.
Attachments
PSOC5-FreeRTOS-demo_CY8CKIT-050.zip
2-LED flasher FreeRTOS sample project for the CY8CKIT-050 development kit
(23.53 KiB) Downloaded 315 times
PSOC5-FreeRTOS-demo_CY8CKIT-014.zip
2-LED flasher FreeRTOS sample project for the CY8CKIT-014 (PSoC First Touch) development kit
(23.63 KiB) Downloaded 201 times
dBFS
Newbie
Newbie
 
Posts: 1
Joined: Sat Jan 12, 2013 11:05 am

Re: FreeRTOS 7.3.0 starting project for PSOC5

Postby Borstenhorst » Sun Jan 12, 2014 10:07 am

Definitely !

Thanks a lot
Borstenhorst
Bite-Size Cheese
Bite-Size Cheese
 
Posts: 13
Joined: Fri Oct 19, 2012 8:24 am


Return to “%s” PSoC5 General

Who is online

Users browsing this forum: No registered users and 3 guests

cron