help please

Discussion of the PSoC Creator Integrated Development Environment for PSoC3 & PSoC5 devices.

Moderator: ericb

help please

Postby lissa » Tue Apr 02, 2013 2:25 am

hello i have a problem in the program of the psoc.
i want to creat a progam with multipluxeur 4 port using Langgueage C and work in Psoc craetor. please help me !!
lissa
Newbie
Newbie
 
Posts: 2
Joined: Tue Apr 02, 2013 2:16 am

Re: help please

Postby danadak » Tue Apr 02, 2013 12:26 pm

Not sure if you want a analog mux or a digital mux. Basically you place that component
on your schematic, double click it, and configure it.

If its a analog mux you have a choice of controlling mux with HW or SW.

1) If HW you can place a control register, and use that to control mux select pins.
Or use a LUT to control the HW select pins.
2) If SW in datasheet are the API's to use to control the mux.

Regards, Dana.
Field Application Engineer
KB1RHB Mostly listen :)
Semi Retired
User avatar
danadak
The Big Cheese
The Big Cheese
 
Posts: 2008
Joined: Thu Dec 27, 2007 8:42 am
Location: New Hampshire


Return to “%s” PSoC Creator (PSoC3 & PSoC5 IDE)

Who is online

Users browsing this forum: No registered users and 1 guest