Protel Symbol

A catchall for PSoC Mixed-Signal Array (microcontroller) discussions not captured by the other forums.

Moderator: ericb

Protel Symbol

Postby graaja » Tue Jun 28, 2005 3:30 am

Hi All,

Has anyone created a Protel schematic symbol for the 29866 part for Protel DXP 2004? Protel already has a Cypress library with parts from the 26xxx family upto 48 pin SSOP. These symbols can be used for most of the devices of other families. But for the 100 pin 29866 part, a new symbol has to be created. Does anyone have this?
User avatar
graaja
PSoC Master
PSoC Master
 
Posts: 3084
Joined: Thu Dec 18, 2003 4:35 pm
Website: http://www.planetpsoc.com
Location: India

Postby lovell » Tue Jun 28, 2005 4:11 am

Only for the first DXP package.
Bill Lovell
User avatar
lovell
The Big Cheese
The Big Cheese
 
Posts: 665
Joined: Sat Dec 20, 2003 6:15 am
Website: http://www.c-linksystems.com
WLM: wlovell@c-linksystems.com
Location: Maine, USA

Postby graaja » Tue Jun 28, 2005 4:31 am

Hi Bill,

I think DXP 2004 should be able to import from earlier versions. Can you post the library here?
User avatar
graaja
PSoC Master
PSoC Master
 
Posts: 3084
Joined: Thu Dec 18, 2003 4:35 pm
Website: http://www.planetpsoc.com
Location: India

Postby lovell » Tue Jun 28, 2005 4:37 am

I have posted both the our schematic and PCB.
Attachments
cLS_LIBs.zip
These are Protel DXP (2000)
(164.53 KiB) Downloaded 1929 times
Bill Lovell
User avatar
lovell
The Big Cheese
The Big Cheese
 
Posts: 665
Joined: Sat Dec 20, 2003 6:15 am
Website: http://www.c-linksystems.com
WLM: wlovell@c-linksystems.com
Location: Maine, USA

Postby graaja » Tue Jun 28, 2005 4:51 am

Thanks a ton, Bill.
User avatar
graaja
PSoC Master
PSoC Master
 
Posts: 3084
Joined: Thu Dec 18, 2003 4:35 pm
Website: http://www.planetpsoc.com
Location: India

Postby lovell » Tue Jun 28, 2005 4:53 am

Most welcome, I hate building them but Protel is always so far behind what's on the market.
Bill Lovell
User avatar
lovell
The Big Cheese
The Big Cheese
 
Posts: 665
Joined: Sat Dec 20, 2003 6:15 am
Website: http://www.c-linksystems.com
WLM: wlovell@c-linksystems.com
Location: Maine, USA

Postby stephen.mcfadyen » Wed Jun 29, 2005 10:11 pm

If the PSoCs pinout was reasonable, making the symbol wouldn't be as tedious!

Ganesh,

If you need some symbols done up, I think I owe you the time. I am running Protel 2004 SP4, so we're compatible. All you need to do is ask!

Steve
stephen.mcfadyen
Cheese Wheel
Cheese Wheel
 
Posts: 64
Joined: Wed Dec 22, 2004 7:30 am
Website: http://www.humber.ca
Location: Ontario, Canada

Postby lovell » Thu Jun 30, 2005 4:36 am

If the PSoCs pinout was reasonable, making the symbol wouldn't be as tedious!


Not just the PSoC. If the Protel libs were up with the rest of the world we be ok. They have a custom symbol generator :roll: . Leaves the rest of us to do it long hand.

Ganesh, some of the symbols will need these libs. The advantage of having been an IPC member.
Attachments
SMN7351_PROTEL.zip
And another IPC lib
(1.25 MiB) Downloaded 2051 times
SMM7351_PROTEL.zip
IPC Protel Lib
(577.42 KiB) Downloaded 1415 times
SML7351_PROTEL.zip
IPC Protel Lib
(576.04 KiB) Downloaded 1370 times
Bill Lovell
User avatar
lovell
The Big Cheese
The Big Cheese
 
Posts: 665
Joined: Sat Dec 20, 2003 6:15 am
Website: http://www.c-linksystems.com
WLM: wlovell@c-linksystems.com
Location: Maine, USA

Postby stephen.mcfadyen » Thu Jun 30, 2005 4:51 am

lovell,

I believe that the IPC libraries are available finally from Altium. The latest library updates included a folder called IPC in the PCB footprint/land pattern library folder.;which contains around 29 separate files.

If you look at the other CAD packages available, they are not much better. I have worked with Orcad Capture/Layout 10.5 and PADs Logic/Router 2005. I find Altium Designer far superior!

Maybe if I am bored I could put together a symbol / footprint association library. I wonder if the guys at Cypress would be interested in that or are willing to pay for all that hard work.. since I am a poor student :(

Steve
Last edited by stephen.mcfadyen on Thu Jun 30, 2005 6:37 am, edited 1 time in total.
stephen.mcfadyen
Cheese Wheel
Cheese Wheel
 
Posts: 64
Joined: Wed Dec 22, 2004 7:30 am
Website: http://www.humber.ca
Location: Ontario, Canada

Postby graaja » Thu Jun 30, 2005 5:20 am

Thanks for the libraries Bill.
User avatar
graaja
PSoC Master
PSoC Master
 
Posts: 3084
Joined: Thu Dec 18, 2003 4:35 pm
Website: http://www.planetpsoc.com
Location: India

Postby graaja » Mon Jul 04, 2005 11:12 pm

Bill,

There were some corrections required to the 29866 symbol.

1. Pin 65 changed to Vss
2. Pins 82 and 83 added as Vcc
3. Pins 84 and 85 added as Vss.

I am attaching the corrected library here.
Attachments
cLS.zip
Modifications made to 29866 symbol
(5.28 KiB) Downloaded 1039 times
User avatar
graaja
PSoC Master
PSoC Master
 
Posts: 3084
Joined: Thu Dec 18, 2003 4:35 pm
Website: http://www.planetpsoc.com
Location: India

Postby lovell » Tue Jul 05, 2005 4:14 am

Ganesh,
Thank you for the correction. Just hate it when that happens mostly after the blank boards have been ordered.
Bill Lovell
User avatar
lovell
The Big Cheese
The Big Cheese
 
Posts: 665
Joined: Sat Dec 20, 2003 6:15 am
Website: http://www.c-linksystems.com
WLM: wlovell@c-linksystems.com
Location: Maine, USA

Postby stephen.mcfadyen » Tue Jul 05, 2005 6:49 am

Hello,

I am currently working creating an integrated library for all modern (recommended for new design) parts. The library will include all derivations of the part and have pcb associations.

Steve
stephen.mcfadyen
Cheese Wheel
Cheese Wheel
 
Posts: 64
Joined: Wed Dec 22, 2004 7:30 am
Website: http://www.humber.ca
Location: Ontario, Canada

Postby graaja » Tue Jul 05, 2005 6:55 am

That is Excellent Steve!
User avatar
graaja
PSoC Master
PSoC Master
 
Posts: 3084
Joined: Thu Dec 18, 2003 4:35 pm
Website: http://www.planetpsoc.com
Location: India

Postby stephen.mcfadyen » Mon Jul 11, 2005 9:44 am

Hey everyone!,

I made an integrated library for all modern PSoC parts in Altium Designer 2004 (DXP). Please let me know if anyone finds an error in either the symbols or associated footprints, I will make the appropriate changes!

Steve
Attachments
psoc.zip
(24.22 KiB) Downloaded 1367 times
stephen.mcfadyen
Cheese Wheel
Cheese Wheel
 
Posts: 64
Joined: Wed Dec 22, 2004 7:30 am
Website: http://www.humber.ca
Location: Ontario, Canada

Protel DXP2004 PSoC Libaray for all released parts Feb 2006

Postby Madd Muffy » Fri Feb 03, 2006 4:07 am

Hi Team,

Here is a copy of my current working Lib. Take note I have changed the QFN footprint for something I have found is a lot more reworkable for low to medium production runs.

Regards

Muffy 8)
Attachments
Altium DXP2004 PSoC Libaray.zip
A Clean Zip file containing PDF file with list of devices in the lib plus the intergrated lib file as well.
CY8C21XXX Family
CY8C24XXX Family
CY8C24X94 Family
CY8C27XXX Family
CY8C29XXX Family
This also includes all the OCD parts as well.
(221.52 KiB) Downloaded 1418 times
Madd Muffy
Newbie
Newbie
 
Posts: 3
Joined: Fri Dec 17, 2004 6:59 am
WLM: mark_cypress@hotmail.com

Update to Include PSoC0100-8K and Power PSoC020204-4K Device

Postby Madd Muffy » Sat Feb 04, 2006 12:58 pm

File Update
Attachments
Cypress PSoC-04Feb2006.zip
(412.75 KiB) Downloaded 1577 times
Madd Muffy
Newbie
Newbie
 
Posts: 3
Joined: Fri Dec 17, 2004 6:59 am
WLM: mark_cypress@hotmail.com

Postby GeorgeIoak » Thu Dec 20, 2007 5:03 pm

I just purchased Altium Designer 6.8 and thought I would check with you guys to see if any of your libraries had been updated since these last posts.

Thanks for doing this, it will save me quite a bit of time!!
User avatar
GeorgeIoak
Cheese Wheel
Cheese Wheel
 
Posts: 99
Joined: Fri May 25, 2007 7:27 am


Return to “%s” PSoC1 General

Who is online

Users browsing this forum: Bing [Bot] and 2 guests